Showing posts with label sewing. Show all posts
Showing posts with label sewing. Show all posts

Sunday, April 14, 2013

One Block, Two Block... Red Block, Blue Block

 
Last night I caught my middle child, P, sitting up in bed reading at 11:30pm (we put her to bed at 8:30pm). As I walked into her room to turn out the light before heading to bed myself, I saw her quickly hide her book "How To Train Your Dragon" under her covers and pretend to be asleep. She knew she was caught and opened one little eye, looked at me sadly and said "I just love to read. Sorry mom."
 
Of course rather than be angry my heart filled with joy! I told her I completely understood, but she had school in the morning and needed to be done now. I couldn't hide my smile as I walked out of her room.
 
(my youngest, C, reading an all time favorite)
 
All five of us Fransons love to read. My children's over-active imaginations have gotten them into plenty of trouble and plenty of fun (remind me sometime to tell you about the universe they have created, complete with a species of animals called a "menygee") 
 
We each have our favorite books. I love to read anything written in the 1800's (Bronte, Austen, Dickens...), my husband loves adventure stories and books that keep him turning the page (as a lawyer I think he finds it a relaxing break from reading serious court cases all day). I think The Boy may have read every Goosebumps book ever written and is currently on a series of Doctor Who books he can't put down. P is now on the last How To Train Your Dragon book (there's 9 of them) and C's favorites are Doctor Seuss books. 
 
So, when I was contacted by Shannon Fabrics and asked if I'd like to do a tutorial for them, I jumped at the chance to play around with these ultra soft and cuddly Doctor Seuss prints that fit our family so well. Ahhhh, minky! I wanted to climb inside this box for an afternoon nap.
 
 
Of course the best spot to read is anywhere comfy and soft. These big soft blocks stacked in a corner next to a shelf overflowing with books makes the most inviting reading nook. To make plenty of these fun blocks I ordered two of Shannon Fabrics Cuddle Quarter Kits. Each kit came with 8 quarter yard strips of fabric. I loved mixing up all the different prints and textures! Each strip measures 9 inches wide. I knew I wanted these blocks to be big and fun so I cut each strip into 9 inch squares. For each block you'll need six different 9 inch squares.

 
Mix up your pieces and lay them out like you see I've done below. I tried to mix up the different textures. Kids love the feel of the smooth next to the bumpy paired with the fuzzy... So FUN!

 
Your next step is to sew your 4 center blocks together. I used a 1/2 inch seam allowance for all my seams. Minky has one side that is very stretchy and one side that's not, plus it's pretty slippery fabric. It can sometimes be a challenge to match your seams perfectly, so pin well! I also found it helped a lot to sew stretchy side to stretchy side (or bias to bias) in order to keep my seams matched up. It may take some practice and lots of pins but I also find minky's fuzziness hides a lot of sewing imperfections, which makes it is pretty forgiving fabric to work with.
 
After you've sew your four middle squares together, sew the 2 side squares to the 3rd block in the row (refer to the above picture for placement).
When you are sewing this piece on, leave about a half inch on each side unsewn like you see I've done below. This will help your blocks have nice square corners.  


 
Once you have those pieces sewn together, it's time to form your block. It's a little tricky to explain so I've drawn up a diagram below...

 
You're going to start by sewing side "a" to side "b". This is where it helps to leave that 1/2 inch unsewn. It will make turning your fabric and getting a sharp corner much easier. As you are putting your block together you'll see what I mean.
 
In the picture below you can see how your fabric will look folded when side "a" matches up to side "b".

 
Here's my little helper holding up the block for you after I've sewn one side "a" and side "b" together.
 

This next picture is a shot when both sides are sewn together.

 
You can see how it's starting to form the block shape. Continue sewing each of the sides together in the same way until you have a completed cube. 
 
 
On your last seam, leave a small opening to turn your block right side out.
 
 
Ready to be stuffed.

 
Stuff your block through the opening and hand stitch your opening closed. I used polyester fiberfill to stuff my blocks. If you wanted a stiffer more "building block" less "pillow block" look (which would also be SUPER CUTE), stuff each block with an 8 inch square block of foam. You can find sheets of foam at places like Joann's Fabric. This will make your blocks even more square and stackable. Either look will turn out soft and oh so fun!  

 

Our completed blocks getting stacked, thrown, loved...



 
and enjoyed with a good book!



 
Materials List:
2 Cuddle Quarter Kits by Shannon Fabrics
(You can find those HERE)
Matching thread
Polyester fiberfill or 8 inch foam cubes, one for each block
 
 
 

 
 


Monday, March 19, 2012

3 Pocket Scissor Case Tutorial


I've got a new tutorial for you to start your week off with, this fun scissor case! The best part is how it's made... by folding your fabric to create the pockets! Super quick and easy.
When you're done you'll have 3 pockets to hold your scissors in; 2 in the front and one on the back...
So let's get started!
The first thing to do is gather your supplies. You're going to need 2 pieces of cute fabric cut 8 1/2 by 11 inches, a piece of fusible interfacing (I used Pellon 808 Craft Fuse. This will give your fabric the strength to hold your scissors) and some scraps of felt and a button for your flower.
Cut your interfacing to 8 1/2 by 11 inches, to fit the back of one of your fabric pieces. Iron it on following the manufactures instructions.
Next you'll want to lay your two fabric pieces right sides together, as shown below...
You are then going to want to make the rounded top. To do this you need to start by folding your fabric in the shape of your scissor case. Because I think it is so much easier for you to see this step, rather than have me try to explain it, I've made this diagram below to show you how to fold your case (I just used a piece of double sided scrapbook paper to demonstrate this step, you'll use your two pieces of fabric, right sides together)
I hope that's clear! You should now have a piece that looks like mine below. You'll notice that along the top edge I drew a curve. You are going to cut along that curved line in your next step.

I cut along my curved line to make a rounded edge for the top of my scissor case...
Open your scissor case up again and it should look like this... (I lifted up one corner of my fabric just to show you I still have my pieces right side together)
At this point you can pin all the way around if you like. Start to sew your two pieces together. Don't forget to leave a small hole to turn your project right side out!
After you have sewn all the way around, turn your project right side out through the small hole. Press it flat with a hot iron.
You are then going to repeat your folding process from above...
All neatly folded. You can iron this to keep your folds nice a crisp.
Now top stitch all the way around your scissor case. It is at this point that I made sure to catch my turning hole on the side of my scissor case in my top stitching to close it up.
And there you go, all finished! A project so easy you can even have a little "helper", just like I did!
For that special touch, add a little flower out of felt and attach to your case. There are lots of tutorials online for felt flowers. You can find my favorites HERE.

Monday, March 5, 2012

Little Gathered Shorts Tutorial

It's a beautiful spring day today in Utah. Unlike a few days ago when I was sewing these little shorts together and it looked like this outside my sewing room window...
So please forgive my terribly dark pictures in my tutorial. Basically I used the same method as I used with my Pajama pants tutoral. For the Peter Pan collar on the little t-shirt I used THIS tutorial. My origional project was to just add the collar to the t-shirt and be done. But once I got started I wanted to complete the outfit with a pair of spring/summer shorts.
Instead of using a pair of pajama pants for my template I used a pair of shorts that fit my daughter well and cut a couple pockets from the left over collar fabric.
Sew your shorts together using the same method as THESE super simple pajama pants.
To make the pocket I just cut two pieces in the shape I wanted my pockets to be and sewed the two together, right side together.
I left a little hole to turn my pocket right side out. I then ironed it flat and pinned it to my pair of shorts.
As you can see I added a cute little pleat to the pocket. I then sewed it to my shorts, leaving the top open. Be sure and leave your turning hole on the bottom of the pocket so when you are sewing the pockets to your pants your stitches close up that hole.
After I added the pockets I thought they still needed a bit more detail, so I gathered up the side of each leg and simply stitched back and forth a couple times to secure those gathers.
Taking a bit of the left over bias tape from my peter pan collar, I tied a couple bows and hand stitched those on top of the gathers.
Today we got a break from the winter weather and I think it got pretty close to 60 degrees outside. Still a bit to cold out for my daughter to wear her new outfit outside but she enjoy running around the house in it. Tomorrow it's supposed to storm once again. Spring weather is such a tease.

Friday, November 11, 2011

Mushroom Christmas Tree Ornament

Pretty cute, huh? It was actually made to be a pin cushion way back in the spring, but it never made it to the blog. It sat there looking sweet on my self in the office for a few months, then the girls got ahold of it and played with it for awhile. Now I've taken it back, hung it on a bit of mini rick rack and plan to make a few more to hang on the Christmas tree this year.

No, my Christmas tree is not up yet... we actually LIKE Thanksgiving around here. I had to dig out this mini tree from the basement to showcase what it will look like, in a few weeks, hanging on a Christmas tree.

I have a tutorial put together for you. I've also copied a pattern sheet to scribd that I'll link to. I have only recently discovered that scribd charges to download things unless you upload something yourself. I wasn't aware of this (probably because I am always uploading its never been a problem for me to download) and I apologize. I am on the hunt for someone new to use in the future who doesn't charge. I actually already downloaded this pattern a few months ago on scribd, so it's there now for those of you who can download it. I'll have my hubby (he's the one who knows how to work all that for me) download it to a better site ASAP.

But here's a few pictures to help you put it together. You'll want to first cut out 5 mushroom cap pieces out of polka dot fabric (The fabric in the picture is pink. I made a cute pink one too, but I'm going to let the girls hang on to that one. Pink doesn't match my current Christmas decor).
You'll then sew these pieces together, like I've shown below...
Once you have the mushroom cap pieces all sewn together, you'll sew that to the mushroom cap BASE. I cut my base and stem from felt. It is stiffer and you don't need to worry about fraying.
Here's a picture of me sewing the cap to the cap base...
I then cut a little hole at the bottom of the cap base. The stem of the mushroom will cover the hole so you don't need to worry about sewing it up. Just make sure you don't cut the hole to big that it won't be covered up by the stem. Now stuff the cap through the hole with a bit of fiberfill stuffing.
Now hand stitch the two short ends of the stem piece together...
and then hand stitch the stem base to the bottom of the stem...

Ugh... ugly, ugly stitches there, but you get the idea. Now stuff your stem with some fiberfill stuffing. You'll then hand sew the cap to the base with a whip stitch and sew a bit of rick rack to the top to hang your ornament. I also added a couple little felt leaves to the top... that's just because I wanted to hide my imperfections where the cap pieces came together at the top. You can do that do if you like the way it looks, or leave it off if you are better at stitching than I am :)


Mushroom Pattern